|
Tag Archive for: airgun sporting association
During the recent collaboration and work between the Airgun Sporting Association (ASA) and the Texas Parks & Wildlife Department, many discussions and committee work were accomplished to help push forward regulations in Texas to allow for hunting with airguns and other pneumatic technologies like Airbows / Air Bolts.
From those discussions, educational content was documented and clarified to help lawmakers and hunters understand airgun technologies at a much deeper level when applied to hunting applications no matter what state you are from. The following is snippet from an educational article published by Texas Parks and Wildlife that discusses these topics.
Avoid Wounding and Loss of Game
Air guns and arrow guns function much differently than centerfire rifles or shotguns most hunters have traditionally used to hunt game birds and animals. Therefore, a hunter’s understanding of the limitations of air guns and arrow guns is critical to minimize or avoid wounding loss when hunting and taking game. Before purchasing an air gun or arrow gun, a hunter should check the specifications to ensure they meet minimum caliber and muzzle velocity or muzzle energy requirements for their state.
As with any legal method of take, knowing the limitations of your specific equipment is critical to reduce or avoid wounding loss. Hunters should understand that although a number of air guns and arrow guns may meet minimum standards to make them legal for hunting, different brands and models have different levels of ballistic performance and effectiveness. Other factors such as proficiency of the hunter using an air gun or arrow gun, distance to target, and type and weight of bullet or arrow used, all factor in to the ability of that air gun or arrow gun to perform well in the field and deliver a lethal shot. Additionally, the amount of air charged in the reservoir on the air gun is diminished after each successive shot which changes ballistics and ultimately the effectiveness of the air gun in taking game. Hunters should be cognizant of the number of shots an air gun or arrow gun can produce on a fully charged tank before becoming ineffective at taking game.
The Effective Range and Shot Placement of Airguns When Hunting
Although big game animals have been harvested with air guns at distances greater than 150 yards, the effective range is recommended to be 75 yards or closer. Beyond 75 yards, the ability of some models of air guns or arrow guns to be lethal becomes diminished, so it is critical for hunters to know the limitation of the model of air gun being used and practice with the equipment just like with any sporting arm.
Shot placement into vital organs (heart, lungs) is also critical in order to minimize wounding loss since cause of death from air guns and arrow guns would be more similar to archery or historic muzzleloader equipment rather than that of a centerfire rifle. Similar to archery hunting, hunters taking animals with an air gun or arrow gun are encouraged to wait an hour before going to retrieve the deer or other game animals, allowing sufficient time for the animal to expire. Above all, hunters should strive to take ethical shots which will greatly reduce chances of wounding loss.
Interview with UpNorthAirGunner About Big Bore Airgun Deer Hunting
Recently, we had the chance to talk with our good friend, Chris Turek from UpNorthAirGunner, who discussed the many factors you need to understand at a deeper level to be successful when hunting with a big bore airgun.
“A lot of us big bore airgunners that got into this sport bring with us years of hunting knowledge from the powder burner (firearm) world. Some of that knowledge is applicable and some of it needs to be totally reconsidered when hunting with big bore airguns.
When I talk with first time big bore airgunners that want to get into deer hunting, I often ask them to totally forget what they know about hunting with firearms and think more like an archery hunter. This mindset starts the conversation to consider shot placement and range to the deer and how those factors become exponentially critical.
Currently available big bore airguns on the market today can vary in foot pounds of energy (FPE) from 175 FPE on the lower end to 700 FPE on the higher end of the spectrum. Even knowing the FPE rating for your gun, you need to understand the ballistic effects of the grain weight of your ammo. Your FPE rating will fluctuate based on the grain weight of the ammo you choose sometimes by over a 100 FPE within the same gun shooting very light ammo vs. very heavy ammo for the given caliber.
You also need to understand these FPE ratings manufacturers publish are recorded at the muzzle and not at the Point of Impact (POI) of the target. So if you are hunting with a big bore airgun that reaches low 200s FPE at the muzzle, at 100 yards your projectile may only be carrying around 150 FPE at the point of impact. Knowing this should have us airgunners take pause when considering longer range shots.
Furthermore, practicing with your airgun at 50-100 yards is critical to learn what your gun will do at the various ranges and velocities (air pressures) and differing ammo grain weights as the trajectory and Point of Impact (POI) will drop by many inches at 100 yards.
This last consideration is quite possibly the most important factor when it comes to hunting. You must understand the anatomy of the game you are hunting especially when it comes to larger game species like White Tail Deer. Understanding the specifics of the vital zone shot area of your game and how to choose your shot placement is critical. With big bore airguns you need to avoid bone as much as possible. You want to make sure your shot doesn’t just get to the vitals – but will actually pass through the vitals of the deer for the most effective shot. Also understand the angle at which you are taking your shot. A broadside shot angle is going to have a lot different penetration characteristic vs. a shot on a deer quartering away or towards you.
I also talk with a lot of powder burner firearm hunters and they swear by the high shoulder bone shot for deer. Unless you are shooting a highly modified airgun that can shoot 700-1000 FPE and at closer ranges, this shot is highly discouraged with big bore airguns and again, you should really be avoiding the larger bones on a deer. This photo for example was a recent range day where I was demonstrating where the high shoulder shot is placed. You really want to be aiming for the middle to rear parts of the vitals zone (heart and lungs) for a more effective shot with a big bore airgun.
Another aspect to consider with big bore airgun hunting is this… Unlike paper targets, deer have this really bad habit of not sitting still when you are getting ready to squeeze that trigger. Knowing your predetermined primary shooting lanes from your hunting position is always great and having the various yardages visually pre-marked out is a great strategy, but deer also have a bad habit of being “woods ninjas” and showing themselves nowhere near your scouted shooting locations.
With varying light and weather conditions you may not have the luxury to pull out your trusty laser range finder to know the exact distance. With airguns, your range estimation could miss that all important vital zone by inches if your range estimation is off when attempting a longer range shot.
Deer also have an awesome ability to react to sights and sounds in the woods and you will hear archery hunters talk about the deer “jumping their shot” or “jumping the string”. Big bore airguns shoot at subsonic velocities so the sound of the airgun shot will get to the deer before the projectile and you might still hit the deer, but if ducks – dodges – flinches – or jumps – that hit may not be where you were aiming, especially at longer ranges.
Check out this video I created on this subject last year during the AirGunDpeot.com Long Ranger Challenge (hitting a golf ball at 150+ yards) when I had a few of my subscribers asking me if I was going to be taking these 150+ yard shots at deer. I was shocked to think people would even consider this as an option and is why I made this video.”
So get online and get connected with other big bore airgunners to pick their brains about their hunting experiences. The airgunning community is growing and with the recent changes in hunting regulations that is happening all over the United States, the number of hunters entering our sport will only continue to get larger. Understanding these principles is important before you go into the woods.
FOR IMMEDIATE RELEASE:
Helena, Montana – July 1, 2018 – The airgun industry has announced the creation of a new association that represents manufacturers, retailers, distributors, and the broader airgunning industry. The Airgun Sporting Association (ASA) has been formed as a non-profit business league as described in section 501(c)(6) of the Internal Revenue Code of 1986, as amended, to promote the common business interests of its members.
The mission of the ASA is to market, promote and serve individuals, companies and corporations involved in the manufacture, importation, wholesale and retail sales and distribution of airguns and related hunting and airgun sport shooting equipment, products, goods and services.
A primary focus of the Association will be the strengthening of relationships between the state wildlife agencies and representatives of the airgun industry. The Association’s work with the state wildlife agencies will target the development of regulations legalizing the use of big bore airguns for big game hunting. Also, the Association will work with state wildlife agencies to help clarify existing airgun regulations for small game hunting.
The ASA has launched an informational website describing the mission and scope of the work being accomplished within the industry as well as a source for the most up-to-date regulatory airgun hunting information for each state. Visit the ASA at: www.AirGunSporting.org
The Bylaws of the Airgun Sporting Association establish the following three membership categories:
- Manufacturing / Importer Members
- Retailer Members
- Distributor Members
Visit ASA at: www.AirGunSporting.org to read the full documentation of bylaws, Board Members, and Executive Committee Members
The founding ASA Manufacturer / Importer Members include:
- AirForce Airguns
- Air Venturi
- Crosman Corporation
- GAMO / Daisy Airguns
- Sig Sauer Airguns
- Umarex USA
Furthermore, ASA has appointed J. Mitch King as President / CEO of the association to lead the daily operations and advocacy work representing the airgun industry.
“This is an exciting time for the airgun industry and I’m thankful for the opportunity to be a part of establishing the Airgun Sporting Association and helping to strengthen the relationship between the airgun industry and the state wildlife agencies.” – J. Mitch King – President / CEO of the ASA
“The formation of the Airgun Sporting Association is an important step forward for the airgun industry. This new association will initially focus on working with our state wildlife agency partners to legalize airguns for hunting and to help with hunter and recreational shooter recruitment. Additionally, the ASA will advocate the diverse uses of airguns as well as airguns being such a historical foundation of the shooting sports” – Richard Turner, President of Umarex USA and ASA Executive Committee Chair
Contact:
Airgun Sporting Association (ASA)
5405 Favorite Gulch Rd.
Helena, MT 59602
www.airgunsporting.org
info@airgunsporting.org
303-585-0377